Synergy Research
Home Research Peptides Contact
Research Peptides
Home › Research Peptides › Guides › Vitamin B12
Research guide

Vitamin B12 research guide

A factual reference for laboratories working with Vitamin B12: what the material is, how it is handled and stored, how to read its certificate of analysis, and how to order it in Canada. It is written for in-vitro research and makes no claims about effects in people or animals.

What is Vitamin B12?

Vitamin B12 in this product is cyanocobalamin, a cobalt-containing corrin complex. At the centre of the molecule a cobalt(III) ion is held in a corrin ring, similar to the porphyrin ring of haem but with one fewer bridging carbon. Below the ring a dimethylbenzimidazole nucleotide coordinates the cobalt; above it sits a cyanide ligand, which is what distinguishes cyanocobalamin from the methyl-, hydroxo- and adenosylcobalamin forms.

The compound is deep red, with absorbance maxima near 361 nm and 550 nm, and it is one of the few laboratory reagents whose concentration can be checked directly by eye and spectrophotometer. Its molar mass is 1355.4 g/mol and the molecule is not a peptide; it is listed in the Small molecules category.

Synergy Research supplies cyanocobalamin as a sterile aqueous solution at 1,000 mcg/mL in a sealed glass vial, rather than as a lyophilised solid. The solution is clear and red.

Specification summary

Format
Solution, 1,000 mcg/mL, sealed glass vial
Sizes
a 1,000 mcg/mL solution vial
Molecular formula
C63H88CoN14O14P
Molar mass
1355.4 g/mol
PubChem CID
5311498
Class
Cobalt corrin complex (cyanocobalamin)

Values are taken from the product page and the public PubChem record. Each lot is confirmed against them by the independent testing reported on the certificate of analysis.

Research context

Cyanocobalamin is a standard reference material in analytical chemistry and microbiology. It is used to calibrate HPLC and microbiological assays for cobalamins, as the ligand in studies of the transport proteins transcobalamin and intrinsic factor, as a photochemistry model for cobalt-carbon bond cleavage, and as a growth factor in defined media for cobalamin-dependent microorganisms and cell lines.

It also appears in coordination-chemistry and spectroscopy research on corrin complexes. The solution sold here is a laboratory reference material, not a pharmaceutical preparation, and no biological outcome is described.

Synergy Research does not evaluate, summarise or endorse the findings of any study. The material is supplied so that laboratories can design and run their own in-vitro experiments.

Storage and handling for laboratory use

Vitamin B12 is supplied as a ready-made solution, so the storage rules differ from those for lyophilised peptides. Keep sealed vials upright, away from light and at the temperature stated on the label; do not freeze a solution vial, since freezing can crack the glass and change the concentration through evaporation on thawing.

Cyanocobalamin solutions are light-sensitive: ultraviolet and strong visible light cleave the cobalt-cyanide bond and convert the compound to hydroxocobalamin. Store the vial in its box or wrapped in foil, refrigerated, and never freeze it.

Once the stopper has been pierced, write the date on the label. Every entry through the stopper is a chance to introduce contamination, so use a fresh sterile needle and syringe each time and never return unused solution to the vial. Record the lot number in your laboratory notebook; it is the link between the vial and its certificate.

Working with the solution in the laboratory

Because the material is already in solution, there is no reconstitution step. The working concentration for an assay is obtained by withdrawing a measured volume with a sterile syringe and diluting it into the buffer or medium the method requires. Wipe the stopper with 70% alcohol and let it dry before each withdrawal.

The solution is ready for dilution. Withdraw it with a sterile syringe through the stopper and dilute into the buffer or medium your method uses. Its red colour and absorbance at 361 nm allow working concentrations to be checked spectrophotometrically against a standard curve.

Dilutions should be labelled with compound, concentration, lot number and date and used within the period your own stability data supports. Working dilutions are generally not stored; they are prepared fresh from the stock vial for each experiment.

How to read the Certificate of Analysis

Every lot Synergy Research sells is tested by an independent Canadian laboratory, and the resulting certificate is published on the Certificates of Analysis page. A certificate has three parts worth checking before you use a vial.

  • Identity. Mass spectrometry measures the molecular mass of the material and compares it with the theoretical value. For cyanocobalamin the certificate should report the concentration of the solution, identity by mass spectrometry (the [M+H]+ ion near 1356.4) or by UV-visible spectrum with maxima near 361 and 550 nm, and purity by HPLC with detection at 361 nm.
  • Purity. Reversed-phase HPLC with UV detection separates the main compound from related impurities. The area of the main peak as a percentage of total peak area is reported as purity. Look for the chromatogram itself, not only the number.
  • Traceability. The lot number on the certificate should match the number printed on your vial, and the certificate should name the testing laboratory and the date of analysis.

If a certificate for your lot is not yet posted, email [email protected] with the lot number and it will be sent when the laboratory report is in.

Frequently asked questions

Which form of vitamin B12 is this?

Cyanocobalamin, the cobalt corrin complex with a cyanide ligand on the cobalt. Methylcobalamin and hydroxocobalamin are different forms with different ligands and spectra.

Why is the solution red?

The cobalt-corrin chromophore absorbs strongly near 361 nm and 550 nm, which gives cyanocobalamin its characteristic deep red colour and allows spectrophotometric measurement.

How should the solution be stored?

Refrigerated, protected from light, and not frozen. Light converts cyanocobalamin to hydroxocobalamin, which changes the spectrum and the identity of the material.

What size is available?

Vitamin B12 is supplied as a sealed vial of 1,000 mcg/mL solution with a published certificate of analysis.

Is this product approved for human or animal use?

No. It is a laboratory reference material supplied for in-vitro research only.

Buy Vitamin B12 in Canada

Synergy Research supplies Vitamin B12 as a 1,000 mcg/mL solution vial. Orders ship across Canada by Canada Post Xpresspost with tracking, and payment is accepted by Interac e-Transfer or card. Every vial is matched to a published certificate of analysis.

View Vitamin B12 product page →

See also: how to choose a research peptide supplier in Canada and the certificate archive.

For Research Use Only. Not for human or animal consumption, and not for use in diagnostic or therapeutic procedures. Nothing on this page describes, recommends or implies any use of this material in people or animals. See our Research Use Policy.

Why order from us
🚚

Fast, tracked shipping

Cold-chain protected where required, dispatched with tracking on every order.

👤

Real people, not bots

Questions answered by our team the same business day.

🧪

Research use only

For Research Use Only. Not for use in diagnostic or therapeutic procedures. Not for human or animal consumption.